Quick Facts

Series

1.	Arcane Communion
2.	Scenes from a Memory
3.	Cloaked in Moonshade
4.	Breaking the Seal

Storyline
An Ancient Gift Arcane Communion Scenes from a Memory Cloaked in Moonshade Breaking the Seal Moonshade Holdout Into the Crevasse The Hidden City The Valewalker's Burden

Screenshots

Videos

Comments

Comment by Jaxor

"This Will Be A Puzzle But For Now Just Click It All"

Does what it says on the box.

Comment by Cymre

Gameplay video for this quest and the next few in the chain. This is just like the Power Grid quest you did earlier.

Comment by WoWGnGP

i made i playthrough of this quest if anyone wish to see how to do it :)
https://www.youtube.com/watch?v=Kj7uS90naNQ&feature=youtu.be

Comment by varenne

Same logic as in Power Grid

This time it is all in 1 room and you have 2 currents ( 2 beams) and 3 seals on the floor.
Objective is to point both beams to the same seals and click on this seals.

Lets suppose initial blue current direction is seal 1
Use 1-st blue pillar and beam switches to seal 2
Use 2-nd blue pillar and beam switches to seal 3

Same for the purple pillars

Breaking the Seal is part of Nightfallen But Not Forgotten - The Light Below storyline.
You can find more info about storyline in the achievement link
You will also need this quest for Good Suramaritan

Here is Breaking the Seal video: https://www.youtube.com/watch?v=Z2uDQwoH4tc

And here is storyline related to this quest:

№ Quest Note Video
33 Arcane Communion https://www.youtube.com/watch?v=a0W_SaJh7Ug
34 Scenes from a Memory https://www.youtube.com/watch?v=_X3ICBjEQYo
35 Cloaked in Moonshade https://www.youtube.com/watch?v=jKIkJYe5Twg
36 Breaking the Seal https://www.youtube.com/watch?v=Z2uDQwoH4tc
37 Moonshade Holdout https://www.youtube.com/watch?v=n3H91-Fh53A
38 Into the Crevasse https://www.youtube.com/watch?v=x42M3BjC6Y4
39 The Hidden City https://www.youtube.com/watch?v=pBUmDBwVb7w
40 The Valewalker's Burden Touch of the Arcan'dor https://www.youtube.com/watch?v=KPhdouV5qt0

№ column is quest approximate order in Suramar storyline

Comment by zuthyx
Each seal can be activated separately when it has two beams on them at once.

One beam from a high pillar, one beam from a low pillar. While solving this puzzle, also keep in mind that each pillar only has two positions it may be in.

Comment by WoWGnGP
i made i playthrough of this quest if anyone wish to see how to do it :)
https://www.youtube.com/watch?v=57f8SDAg4QU&feature=youtu.be

Comment by Rocknight
Blizz HQ:

This quest isn't annoying enough, let's add spiders!

Comment by Quantapz
Arachnophobia from above!

Comment by 677326
You want a seal on the floor charged with BOTH beams.

1. Pick a seal to focus on
2. If the blue beam nearest you is NOT pointing at the seal you want, click it
3. If it still isn't focused at the spot you want, run round to the other blue beam and click it, success!

Do the same method for the pink to get both beams pointed at one floor seal spot.

Click the seal. Kill the trash. You win!

Comment by kromzul
This is a diagram of this little puzzle that I drew up, which will hopefully be informative! It's not very fancy, but should communicate how it works. Each of the towers has two possible positions; one position for each of the two large ones will power one of the small ones, which will then have its own two positions. It should be pretty easy how to figure out how to get two power beams into each target using this map.

http://imgur.com/a/8JyY4

Comment by bazzyl
How to do this shown in the video below:

https://youtu.be/Eu4dSLOvZKA

Comment by Zaynah
The three seals are located around the central pedestal in the room. In order to break one of the seals you have to perform the following steps:
Focus the blue beam on the seal
Focus the purple beam on the seal
Click on the seal

You can change the focus of the blue beam by clicking on one of the taller columns and you can the focus of the purple beam by clicking on one of the smaller columns.
Once you break a seal, a spider will appear and attack the closest player (probably you).

Good luck!

Comment by rodmin
If by any chance do you have arachnophobia...

... brace yourself for the cinematic of your nightmares.

Even i felt my back's skin shivering.

Comment by JNasty
Video guide: https://youtu.be/ZxzmW3hWTDM

For this quest, you will need to use the same skills you developed during the quest "Power Grid" to get the Low and High Potency Switches to blast ley energy at the same seal simultaneously. After you break each seal, a spider will drop down and attack you. Follow this order under the starting conditions to quickly finish the quest:

Seal of the Sky:
Interact with the right-side (northeast) Low Potency Coil
Interact with the left-side (southwest) High Potency Coil

Seal of the Earth:
Interact with the right-side (northeast) Low Potency Coil
Interact with the right-side (northeast) High Switch

Seal of the Tides
Interact with the left-side (southwest) Low Switch
Interact with the left-side (southwest) High Potency Coil

Comment by bigworm2
What I wasn't getting that I needed do AFTER I got 2 beams on a seal was that I needed to CLICK THE SEAL. Thanks!

Comment by Boxofbeer
There are two beams, you have to make them both channeled on to any seal to make it clickable

Breaking the Seal — https://www.youtube.com/watch?v=ZsiQwO-HDA0

Comment by Ovidian
The seals are slabs on the floor surrounding the light bulbs.

Comment by Allanjpm
This quest Power Grid is the worst i have ever seen. Shame Blizzard. And you want subscription for such garbage?

Links

Breaking the Seal

Break the Seal of the Tides, Seal of the Earth and Seal of the Sky.

	Seal of the Tides broken (1)
	Seal of the Earth broken (1)
	Seal of the Sky broken (1)
	Tall Beam (1)
	Tall Switch (1)
	Short Beam (1)
	Short Switch (1)

Description

<As you behold the relic, Thalyssra's voice echoes in your mind.> You found it! But it is sealed away tight. Search the room for a way to break those seals.

Completion

Rewards

You will receive:

Gains

Upon completion of this quest you will gain:

25 reputation with The Nightfallen

See if you've already completed this by typing:

/run print(C_QuestLog.IsQuestFlaggedCompleted(42225))